Jamieson Model HS Laser Machines for Sheet Materials
Our Jamieson HS machines can laser cut and laser engrave flat surfaces and can accommodate materials of unlimited sheet length. For more information or to view samples made with Jamieson Laser Machines go to our Materials & Applications page.


Main Features
Laser Works design software included. State-of-the-art engraving and cutting software supporting commonly used graphic formats.
Mouse Operation and Modify Parameters (while machine running).
256MB Program storage in machine.
Coated ZNSE meniscus focusing lens. Choice of 2", 2.5" or 3.3" focal lengths.
Red Dot alignment laser pointer for accurate positioning of your parts.
The work rests on a down-draft table connected to the exhaust fan. This pulls fumes and debris away from the work piece; the resulting vacuum is strong enough to straighten and flatten thin materials against the work table for laser cutting and laser engraving in perfect focus.
3.5" Operator Panel with On Screen File Preview and Simulation.
USB port and Ethernet Cable for PC connection.
Restart After Power Failure without loss of position.
Manual Focus. Fast & Simple focusing.
Front and Rear openings and allow pass through feeding of material and the use of roll material.
Water cooler for the CO2 laser tube, exhaust fan, and air assist compressor are all included in the price.
Also included in the price are our one year parts warranty and one-year laser tube and optics warranty.
Available Options
Worktable with removable slats.
CO2 Lasers Tubes with 60 Watts, 100 Watts, or 130 Watts.
Double your production with two focusing heads connected to two laser tubes.
Double beds with auto-transfer allows for simultaneous processing and reloading.
Fume Extractor, for indoor exhausting, with filter bag, HEPA and carbon filters, to satisfy local environmental regulations.


Jamieson Laser Vacuum Work Table Options
Two table variations are available on our HS laser machines to give you the best results for your work. Our durable steel honeycomb table is standard and ideal for small parts and materials which are sensitive to laser beam reflection against their undersides. Our optional slatted table, shown to the right, features narrow-edged aluminum slats which can carry heavy loads and are individually replaceable. You can change from one table to another in seconds.
Specifications
Model HS-640
Complete System starts at only:
$9,900.00
- Work Area (Inches): 16 x 24 x 2
- Maximum Sheet Size: 24″ Wide
- Laser Type: Sealed CO2 DC Excited
- Laser Power (Watts): 60
- Lens Focus: 2″ or 2.5″
- Max. Engraving Speed (in/sec): 42
- Smallest Letter: 0.040 inches Engraved
- Cutting Accuracy: 0.002
- Power Supply (V/Ph/Hz): 220/1/60
- Connected Load (Watts): 1000
- OS Compatibility: Windows XP, Vista, 7, 8, 10 – 32/64 Bit
- Graphic Formats: CDR, DXF, DWG, BMP, GIF, JPEG, PCX, TGA, TIF, PLT
- Machine Size (Inches): 46 x 37 x 45
- Weight (Lbs): 650
Model HS-900
Complete System starts at only:
$14,700.00
- Work Area (Inches): 24 x 36 x 2
- Maximum Sheet Size: 36″ Wide
- Laser Type: Sealed CO2 DC Excited
- Laser Power (Watts): 60 or 100
- Lens Focus: 2″ or 2.5″
- Max. Engraving Speed (in/sec): 42
- Smallest Letter: 0.040 inches Engraved
- Cutting Accuracy: 0.002
- Power Supply (V/Ph/Hz): 220/1/60
- Connected Load (Watts): 1000 to 1500
- OS Compatibility: Windows XP, Vista, 7, 8, 10 – 32/64 Bit
- Graphic Formats: CDR, DXF, DWG, BMP, GIF, JPEG, PCX, TGA, TIF, PLT
- Machine Size (Inches): 58 x 45 x 45
- Weight (Lbs): 700
Model HS-1390
Complete System starts at only:
$15,900.00
- Work Area (Inches): 35 x 51 x 2
- Maximum Sheet Size: 51″ Wide
- Laser Type: Sealed CO2 DC Excited
- Laser Power (Watts): 60, 100 or 130
- Lens Focus: 2″, 2.5″ or 3.4″
- Max. Engraving Speed (in/sec): 42
- Smallest Letter: 0.040 inches Engraved
- Cutting Accuracy: 0.002
- Power Supply (V/Ph/Hz): 220/1/60
- Connected Load (Watts): 1500 to 2000
- OS Compatibility: Windows XP, Vista, 7, 8, 10 – 32/64 Bit
- Graphic Formats: CDR, DXF, DWG, BMP, GIF, JPEG, PCX, TGA, TIF, PLT
- Machine Size (Inches): 76 x 56 x 45
- Weight (Lbs): 830
Model HS-1610
Complete System starts at only:
$16,950.00
- Work Area (Inches): 39 x 63 x 2
- Maximum Sheet Size: 63″ Wide
- Laser Type: Sealed CO2 DC Excited
- Laser Power (Watts): 60, 100 or 130
- Lens Focus: 2″, 2.5″ or 3.4″
- Max. Engraving Speed (in/sec): 42
- Smallest Letter: 0.040 inches Engraved
- Cutting Accuracy: 0.002
- Power Supply (V/Ph/Hz): 220/1/60
- Connected Load (Watts): 1500 to 2000
- OS Compatibility: Windows XP, Vista, 7, 8, 10 – 32/64 Bit
- Graphic Formats: CDR, DXF, DWG, BMP, GIF, JPEG, PCX, TGA, TIF, PLT
- Machine Size (Inches): 86 x 60 x 45
- Weight (Lbs): 1200
Click here to see our financing options.
Reach Us
Need help finding your laser machine? We are here to help.
50 Thomaston Road, PO Box 1531 Litchfield, CT 06759