Jamieson Laser Engraving Machines, Laser Markers & Laser Cutters

Jamieson Model HS Laser Machines for Sheet Materials

Jamieson Laser Cutter Machine Model HS-900

Model HS-900

Our Jamieson HS machines can laser cut and laser engrave flat surfaces and can accommodate materials of unlimited sheet length.Winter Village Engraving on Wood.

For more information or to view samples made with Jamieson Laser Machines go to our Materials & Applications page.

Front view of the Jamieson Laser HS 900 model. Laser cutter for wood, acrylics and sheet materials.

Main Features


  Laser Works design software included. State-of-the-art engraving

    and cutting software supporting commonly used graphic formats.

  3.5" Operator Panel with On Screen File Preview and Simulation.

  Mouse Operation and Modify Parameters (while machine running).

  USB port and Ethernet Cable for PC connection.

  256MB Program storage in machine.

  Restart After Power Failure without loss of position.

  Coated ZNSE meniscus focusing lens. Choice of 2", 2.5" or 3.3"

    focal lengths.

  Manual Focus. Fast & Simple focusing.

  Red Dot alignment laser pointer for accurate positioning of your parts.

  Front and Rear openings and allow pass through feeding of material

    and the use of roll material.

  The work rests on a down-draft table connected to the exhaust fan.

    This pulls fumes and debris away from the work piece; the resulting

    vacuum is strong enough to straighten and flatten thin materials

    against the work table for laser cutting and laser engraving in perfect


  Water cooler for the CO2 laser tube, exhaust fan, and air assist

    compressor are all included in the price.

  Also included, personalized training, our one-year parts

    warranty and one-year laser tube and optics warranty.

Laser cutting head for the Jamieson Laser engraving, laser marking and laser cutting machine model HS 900.
The Jamieson Laser Machine Operator Panel for the HS laser cutters has a 3.5" TFT screen with file preview and simulation.

Available Options


  Worktable with removable slats.

  CO2 Lasers Tubes with 60 Watts, 100 Watts, or 130 Watts.

  Double your production with two focusing heads connected to two

    laser tubes.

  Double beds with auto-transfer allows for simultaneous processing

    and reloading.

  Fume Extractor, for indoor exhausting, with filter bag, HEPA

    and carbon filters, to satisfy local environmental regulations.

Jamieson Laser Engraving, Marking & Cutting Machines Work Table.Jamieson Laser Vacuum

Work Table Options


Two table variations are available on our HS laser machines to give you the best results for  your work. Our

durable steel honeycomb table is standard and ideal for small parts and materials which are sensitive to laser beam reflection against their undersides. Our optional slatted table, shown to the right, features narrow-edged aluminum slats which can carry heavy loads and are individually replaceable. You can change from one table

to another in seconds.

Specifications Table

Model HS-640 HS-900 HS-1390 HS-1610
Complete System starts at only: $9,900.00 $14,700.00 $15,900.00 $16,950.00
Work Area (Inches) 16 x 24 x 2 24 x 36 x 2 35 x 51 x 2 39 x 63 x 2
Maximum Sheet Size 24" Wide 36" wide 51" wide 63" wide
Laser Type Sealed CO2 DC Excited
Laser Power (Watts) 60 60 or 100 60, 100 or 130 60, 100 or 130
Lens Focus (inches) 2" or 2.5" 2", 2.5" or 3.4"
Max. Engraving Speed (in/sec) 42
Smallest Letter 0.040 inches Engraved
Cutting Accuracy 0.002
Power Supply (V/Ph/Hz) 220/1/60
Connected Load (Watts) 1000 1000 to 1500 1500 to 2000
OS Compatibility Windows XP, Vista, 7, 8 - 32/64 Bit
PC Connection Ethernet (10 Mbps and 100 Mbps) and USB 2.0
Machine Size (Inches) 46 x 37 x 45 58 x 45 x 45 76 x 56 x 45 86 x 60 x 45
Weight (Lbs) 650 700 830 1200




50 Thomaston Road, PO Box 1531, Litchfield, CT 06759  Phone: 860.482.3375 Fax: 860.482.2449  E-mail: sales@jamiesonlaser.com

Jamieson Laser, LLC

All Rights Reserved

Privacy     Site Map