The Jamieson HS-R1610 laser system is a high production laser cutter for use with roll materials. Our HS-R1610 has a 39" x 63"work area and accommodates roll materials up to 60 inches wide. This model feature an aluminum conveyor bed that is synchronized with the powered roll feeder in order to bring your material forward as needed. It can also cut with intermittent feeding to produce cuts which are longer than the table. Although designed for roll materials, this machine is versatile enough to laser engrave or laser cut flat materials just like our traditional laser machines.
Graphic Design software included. State-of-the-art engraving and
cutting software supporting commonly used graphic formats.
USB port interface.
32MB Program storage in machine.
Analog laser control to reduce power around tight curves.
Coated ZNSE meniscus focusing lens. Choice of 2" or 2.5"
Red Dot alignment pointer for accurate positioning of your parts.
Materials are fed through from the back of the machine by a
powered roll feeder.
Drift corrector for feeding the material with an accuracy of +/-0.04",
and intermittent feeding for cuts longer than the table.
Water cooler for the CO2 laser tube, exhaust fan, and air assist
compressor are all included in our price.
Also included in the price are personalized training, our two-year
CO2 Lasers Tubes with 60, 100, or 130 Watts.
Double your production with two focusing heads connected to
two laser tubes.
To maximize the production of your laser cutter, Jamieson Laser conveyor machines have an option for dual lasers which will allow for two parts to be cut simultaneously.
The conveyor bed automatically feeds material forward as needed. Durable aluminum slats will not be damaged as the laser beam cuts the material, ensuring a long work life for your laser cutter.
|Complete System starts at:||$34,900|
|Work Area (Inches)||39 x 63|
|Roll Feed and Material Conveyor||Yes|
|Max Width (Inches) of Material (Roll)||60|
|Dual Focus Heads||Optional|
|Laser Power (Watts)||60, 100, or 130|
|Red Dot Alignment Pointer||Yes|
|Max. Engraving Speed (in/sec)||42|
|Resolution Dots & Lines/Inch||75 - 2400|
|Min. Engraved Letter Size (Inches)||0.040|
|Power Supply (V/Ph/Hz)||220/1/60|
|Connected Load (Watts)||1250 - 2000|
|Drive Motors||Micro Steppers|
|Graphic Formats||CDR, DXF, DWG, BMP, GIF, JPEG, PCX, TGA, TIF, PLT, AI, DST|
|Machine Size with Roll Feed (Inches)||86 x 130 x 41|